PDA

View Full Version : Brigade BC Picture request



ScubaCaveman
05-15-2009, 10:43
Can those of you that have the Brigade post a few pictures? I looked and looked and only found a couple, but none that really highlight the design. Or can you point me in the direction of some....the one on the ST site leaves a little to be desired. Also, is the 35lb bladder made of a thinner or lighter material than the 44lb bladder? Does the bladder attach the same way for both bladders?

LiteHedded
05-15-2009, 12:30
http://litehedded.com/images/brigade.jpg

http://litehedded.com/images/brigade1.jpg

the brigade actually comes with those trim pockets mounted on the lower cam strap but that's pretty retarded. I moved mine up to the top strap

Miked
05-15-2009, 15:12
Liteheaded, (sorry for the mini hijack, Scubacaveman),
I have a Zeagle concept 2 BC, and it has the same "trim pockets on the lower cam band" problem.
Might I ask how you accomplished the move to the upper band.

[It looks to me that I might be able to (carefully) cut the stitching where the pockets are sewn to the harness, then just slip them off the lower band, and slide them on the top band, using just the "belt loop" straps to hold them in place.]-But I'm a little reluctant to start cutting stitches without some experienced advice.

Thanks,
Mike

LiteHedded
05-15-2009, 15:21
mine weren't sewn on
there was just a loop of webbing that the cam band slipped through

ScubaCaveman
05-23-2009, 11:26
Thanks for the picture....I went ahead with a Zeagle BC!!!

scubasavvy
05-23-2009, 13:55
Thanks for the picture....I went ahead with a Zeagle BC!!!

Zeagle is the only way to go. Let us know how you like it...:smiley20:

Zenagirl
05-23-2009, 17:56
Remember that the Brigade is just a Ranger with a smaller wing, so for all intents and purposes it'll look exactly like a Ranger.