PDA

View Full Version : strobe selection



Bilsant
11-14-2009, 11:22
I have a Sony DSC P150 camera in the Sony MPK housing. It works wonderfully, but I wanted to add an external strobe. I've seen photos of other folks who managed to accomplish this, but I can't figure out how an external strobe could be linked to the camera without some sort of port.

Is there something I'm missing? :smiley5:

I'm very new to this, so all recommendations are welcome.

Thanks

Okc_diver
11-14-2009, 13:34
You could try a sync cable attached to the front of the u/w housing in front of the camera's internal flash. Flash would be attached by the arm and tray to the housing