PDA

View Full Version : RANGER / trim weight pocket configuration..



sungator
12-28-2009, 12:23
I scored a pair of Zeagle trim weight pockets for Christmas. :smiley1:

I'm not sure of the proper mounting configuration. Obviously, the tank band goes through the fixed loop. 1) top or bottom band? -and- 2) where does the vecro loop attach? :smiley5:

tanks....

thor
12-28-2009, 12:27
It's designed to go in the lower band and the velcro attaches to the back of the BC, but it actually works better if you attach it to the upper band. The velcro won't work on the upper band so I just use zip ties to keep them from shifting.

sungator
12-28-2009, 12:47
It's designed to go in the lower band and the velcro attaches to the back of the BC, but it actually works better if you attach it to the upper band. The velcro won't work on the upper band so I just use zip ties to keep them from shifting.


Why does it work better on the top? It seems like it would be harder to release from there.

scubagirlj
12-28-2009, 18:19
its all about trim....

in_cavediver
12-28-2009, 18:23
Another tip for those without the trim pouches - I used to thread a 2lb hard weight onto the top tank band. Did the same thing and was pretty much free.