PDA

View Full Version : Recycled Diver



hub7318
04-26-2010, 17:31
After a 30 year absence I'm back blowing bubbles...what a thrill

navyhmc
04-26-2010, 18:27
After a 30 year absence I'm back blowing bubbles...what a thrill

Welcome back to the blue! :smiley20:

chilly willy
04-26-2010, 20:00
Welcome back, things have changed just a bit.:smiley36:

DevilDiver
04-26-2010, 20:23
Welcome back and wecole to the forum.

Perhaps you have some old school stories that you could share?

vegas911diver
04-26-2010, 21:30
The "dent" is standard on all yoke valves and is there to assist in installing an O-ring into the valve. If you ever put an O-ring in, you will form a small loop, and that area eases the install without causing damage to the O-ring.

And welcome. lol

inventor
04-26-2010, 22:08
The "dent" is standard on all yoke valves and is there to assist in installing an O-ring into the valve. If you ever put an O-ring in, you will form a small loop, and that area eases the install without causing damage to the O-ring.


Uh, OK.:smiley31: And welcome to the site.

Welcome and welcome back to diving.:smiley20:

vegas911diver
04-26-2010, 23:47
OOPS Not sure how I snuck that one in there. SORRY!!!! LOL