PDA

View Full Version : used steel 120



bigman241
06-12-2010, 20:26
I found a used steel 120 online for sale. new hydro done this month new boot. comes with a sherwood din only 300 bar valve. Looks clean no rust.
With shipping looking at 250 to my door. Is it worth thinking about. Figure maybe since it is ready to go with new hydro and everything but a fill

sterlinghe92
06-12-2010, 23:56
Sounds like a good deal. Are there pictures? Whats the outside look like?! Is it nitrox(you had talked about nitrox a little).

Etc.

But those new are, what, 400?!

daZZ
06-13-2010, 00:07
big tank 120 cf. hmm 300 bar. is your first stage 300bar din?

bigman241
06-13-2010, 00:29
My flathead 7 is din. DIn is din right not 300din or 200din? I planned for hpsteel 130s when I bought my gear so I bought the din reg and the adapter for yoke. GLad I did since they old al80s I bought are yoke only.
big tank 120 cf. hmm 300 bar. is your first stage 300bar din?

navyhmc
06-13-2010, 06:31
My flathead 7 is din. DIn is din right not 300din or 200din? I planned for hpsteel 130s when I bought my gear so I bought the din reg and the adapter for yoke. GLad I did since they old al80s I bought are yoke only.
big tank 120 cf. hmm 300 bar. is your first stage 300bar din?

Din is either 200 or 300 Bar. 300 is a bit longer in the threads. a 300 din reg can be used in a 200, but not the other way around. A 300 DIN valve has a small vent hole on the side. This is to prevent a 200 bar reg from being used on a 300 bar tank. A 300 DIN reg has longer threads than a 200 DIN: 5 vs. 7 as I recall-don't know where I got that though. Now adays, most regs are 300 DIN, but there are 200's out there-I have one.

jbres1
06-13-2010, 10:58
Hi,

Is it a LP120 or HP120 ?
Is it Painted or Galv. ?
Who is it made by ? Faber (painted) PST, Worth., Sherewood, Asahi, OMS , you get the idea ?
What is the original hydro date ?

I ask because each cylinder is a little different, Faber makes both LP and HP. The HP Faber is like a rock, -16 when full.
Jim Breslin

bigman241
06-13-2010, 12:51
it is a 300 fin. 99% sure the flathead is aswell. It is pst 3500 psi tank. Looks real good no rust or anything.

Here is the link Scuba Tank 120cuft 3500psi Steel **New JUN/2010 Hydro** - eBay (item 280518440586 end time Jun-15-10 10:15:24 PDT) (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280518440586&ssPageName=STRK:MEWAX:IT)