Datamask uploading/downloading help!

[kroorda]

I have two datamasks and have been completely unable to upload or download either mask. I've followed the instructions in the manual (pg 124) and put the mask in the SET F mode first, but it doesn't work. I've tried doing it with the mask in the NOR mode, and that doesn't work. Any advice from someone who has had success uploading/downloading this mask would be most appreciated. Thank you.

[RECDiver]

You have TWO of them?!!

[dludwig]

[RoadRacer1978]

Originally Posted by kroorda

I have two datamasks

You lost me right there. Lucky SOB.

[NitroWill]

Ill send Tommy a link to this thread - he owns one of these - maybe he can help..

[Jipps]

let me know how you like them, once you get them to work, i havent gotten any feedback about them.

[kingfish]

Yeh....you are supposed to have a spare mask arn't you? :P

Jas.

[bperrybap]

I don't have a mask to try but I believe you just
hook the cable up to the mask when it is in surface mode.
See page 21 of the manual.

I believe that the comment about Set F Group and Free
dive alarms on page 124 is saying that those options can
only be set by the buttons on the mask and cannot be set by
the s/w and PC interface.

--- bill

[Krafcheck]

I have a VT3 and it was hard at first but i eventually figured it out. you name your new log, then it takes you to a screen that that says it is connected to the computer via cable, then the countdown from 120 seconds starts, and then you click on a the link on the pop up window and it starts to download. Sometimes it takes several tries but it eventually gets through it all.

[BoomerNJ]

If you give me your spare one, I'll help you...