http://forum.scubatoys.com en Sat, 21 Nov 2009 02:38:31 GMT vBulletin 3 http://forum.scubatoys.com/images/misc/rss.jpg http://forum.scubatoys.com http://forum.scubatoys.com/computers-gauges/28121-hollis-dg-02-nitrox-computer.html Fri, 20 Nov 2009 23:56:48 GMT How come I haven't seen any user reviews of this computer? The price is decent*, the warranty generous, and the numbers are big!

It reminds me of my Oceanic Versa Pro.

Does anyone have first hand comments on this computer?

*(I have seen it between $249 and $284) ]]> Computers and Gauges Zonicles http://forum.scubatoys.com/computers-gauges/28121-hollis-dg-02-nitrox-computer.html http://forum.scubatoys.com/computers-gauges/27936-wisdom-1-download-cable-issues.html Wed, 11 Nov 2009 00:41:11 GMT Is anyone able to send me a link to download the driver needed for my wisdom 1
I have wisdom 1 computer and I just purchased the cable and sw version 1.0.0
I own a mac book pro that has parallels on it which allows me to have windows XP on my mac comp. So I have dl'ed the software and got an error message that read USB interface NOT FOUND, reading the problems on another board I assumed I might need the latest version, and that is where my problems exist.
I live 20 miles from the closest town and am on satellite internet, I can open the first page of sherwood scuba on my Mac side with no problem at all and get to the download page. Even dl'ed it to the mac side without thinking. (I know it isn't compatible) but when I go to my windows side and go to the sherwood site I don't get the whole page downloaded and am unable to get to the download page to get to the link. and this is what I am hoping someone can help me with.
Does anyone think that the error I had is due to a faulty cable?
__________________ ]]> Computers and Gauges sassyalice http://forum.scubatoys.com/computers-gauges/27936-wisdom-1-download-cable-issues.html http://forum.scubatoys.com/computers-gauges/27790-all-way.html Wed, 04 Nov 2009 02:28:05 GMT I was reading the other forum about the needle on the gauges moving when the air is not all the way on. My question is if you have a AI computer (with digital numbers) will these numbers fluctuate or is there another way to verify that the air is all the way on? (besides the obvious checking the valve) Just curious. I was reading the other forum about the needle on the gauges moving when the air is not all the way on. My question is if you have a AI computer (with digital numbers) will these numbers fluctuate or is there another way to verify that the air is all the way on? (besides the obvious checking the valve) Just curious. ]]> Computers and Gauges rednose83 http://forum.scubatoys.com/computers-gauges/27790-all-way.html http://forum.scubatoys.com/computers-gauges/27727-tusa-iq-800-a.html Sun, 01 Nov 2009 05:55:19 GMT Hi all

I can't figure out how to change imperial to metrics in Tusa IQ 800.. I just bought preowned Tusa IQ 800.. and I am using meter and celsius instead of feet and fahrenheit.. Does any of you know how to? ]]> Computers and Gauges opensight http://forum.scubatoys.com/computers-gauges/27727-tusa-iq-800-a.html http://forum.scubatoys.com/computers-gauges/27713-vt-3-vs-elite-t3.html Sat, 31 Oct 2009 00:42:18 GMT treated myself to new AI computer(retail therapy) thought I ordered an aeris elite t3 but received an oceanic vt-3-ST says are virtually the same except for slight cosmetic differences-price was more than right so am keeping the oceanic-any input? treated myself to new AI computer(retail therapy) thought I ordered an aeris elite t3 but received an oceanic vt-3-ST says are virtually the same except for slight cosmetic differences-price was more than right so am keeping the oceanic-any input? ]]> Computers and Gauges scubagirlj http://forum.scubatoys.com/computers-gauges/27713-vt-3-vs-elite-t3.html http://forum.scubatoys.com/computers-gauges/27592-there-way-erase-logs-oceanic-geo.html Tue, 27 Oct 2009 13:09:28 GMT Hi, I have purchase used Oceanic Geo wrist computer with less than 10 dives logged. I could not find any information how to reset all logs and history to start fresh recording without PC interface. Is there something like factory reset? Appreciate your feedback Regards Hi,

I have purchase used Oceanic Geo wrist computer with less than 10 dives logged. I could not find any information how to reset all logs and history to start fresh recording without PC interface. Is there something like factory reset?
Appreciate your feedback

Regards ]]> Computers and Gauges gb3 http://forum.scubatoys.com/computers-gauges/27592-there-way-erase-logs-oceanic-geo.html http://forum.scubatoys.com/computers-gauges/27569-gps-underwater.html Mon, 26 Oct 2009 04:17:07 GMT Out of curiosity and sense I am not finding any information and I am still looking I thought I would call once again upon the wisdom of my more experienced and knowledgeable divers of this forum.

Are there any Underwater GPS Devices out there that work? Weather it be real time 40' under or a device I can plot my findings with as I am exploring the underwater realms?

Gerry ]]> Computers and Gauges GMDGeek http://forum.scubatoys.com/computers-gauges/27569-gps-underwater.html http://forum.scubatoys.com/computers-gauges/27568-another-compass-question.html Mon, 26 Oct 2009 04:10:39 GMT I've evaluated and researched regulators, octos, BC's, DC's, and much more and now I am going to work on figuring out a Compass.

Some might say "a compass is a compass" but in my experience (which is limited at this point) I have used 2 compasses underwater and have been very displeased with them. Granted they were rental gear but still none the less disappointed with them a lot - they both stuck and took forever to orient to NORTH.

I do know I want the watch to be mounted on my wrist. But what I want to know what is the best compass out there? Is there one that is a combo compass AND electronic compass? And no, I am not talking dive computer.

My background with compasses is pretty solid - We used them in Boy Scouts all the time and I've been on lots of Geo hunts too.

So I do know my way around a compass.

I welcome all feedback and thanks,
Gerry ]]> Computers and Gauges GMDGeek http://forum.scubatoys.com/computers-gauges/27568-another-compass-question.html http://forum.scubatoys.com/computers-gauges/27520-wisdom-2-computer-display-question.html Sun, 25 Oct 2009 01:23:20 GMT On a recent dive in the Caymans, after we performed our safety stop, the unit started to beep and displayed "RES" and "GAS". The manual does not cover this condition. Any guesses what this may be ?

Thanks ]]> Computers and Gauges don blake http://forum.scubatoys.com/computers-gauges/27520-wisdom-2-computer-display-question.html http://forum.scubatoys.com/computers-gauges/27501-elite-t3-software.html Sat, 24 Oct 2009 01:10:35 GMT I am curious about my software, is there a back-up function that I can use with my Aeris Computer Interface software? I am thinking about a laptop upgrade and I don't want to hand enter my data. Any help is appreciated!

Rich ]]> Computers and Gauges rsmith5894 http://forum.scubatoys.com/computers-gauges/27501-elite-t3-software.html