Scott, gotta question about my wifes Zena

[creggur]

In the pictures on your website it shows two stainless steel D-rings about midway up the corset, and two at the bottom.
On my wifes Zena that we got in July there are only the two at the bottom.

If there's a way to get these we'd like to, as it would make life a lot easier as far as clipping things off go..

[ScottZeagle]

The extra small front panels don't have them, because they wont fit in the same spot as the others....

I am assuming that she has an XS front panel???

If not, let me know...cause they should be on there!

Scott

[creggur]

Yep it's an XS. That explains it. Thanks for the quick reply....

So I guess there is no way to add them huh?

What about a velcro piece like the one that holds the pocket on except with a D-ring attached to it? Doesn't have to be a steel D-ring, and doesn't have to be very large just something to clip a whistle or a safety sausage to.....

[ScottZeagle]

I'm working on it...

Maybe for 2008 we can figure something out....the problem is, you can't retrofit an older panel without taking the whole thing apart.

[creggur]

Actually I mean like an accessory.
If you took the velcro setup that is on the pocket on a Zena (1 double soft side/2 hard side flaps) and attached a D-ring to it, then you could hang it on the upper webbing on the front panel. It seems like it would support a good bit with the velcro doubled up in that fashion.

I might not be describing what's in my minds-eye very well..

[Zenagirl]

I get what you mean, and I like it!! I'm not a big fan of the D rings that are on the ends of the straps since they sort of dangle limply, but if I could get a removable metal D ring that attaches with velcro to the straps, I could secure my stuff a little better.

Come on Scott, it couldn't be that hard to sew a D ring securely onto a 1" band of velcro to attach to a strap on a Zena....gee, if only I knew how to sew.

[thesmoothdome]

So, let me get this right. We're talking about D rings and corsets.....mmmmmm corsets.....

[creggur]

Originally Posted by Zenagirl

I get what you mean, and I like it!! I'm not a big fan of the D rings that are on the ends of the straps since they sort of dangle limply, but if I could get a removable metal D ring that attaches with velcro to the straps, I could secure my stuff a little better.

Metal would be great, but even a heavy duty plastic one would work..

Come on Scott, it couldn't be that hard to sew a D ring securely onto a 1" band of velcro to attach to a strap on a Zena....gee, if only I knew how to sew.

Same with my wife. She can sew a little bit, but she's never done anything with material as heavy as the webbing, and never with D-rings. Where the heck would you get a D-ring anyway??

[ScottZeagle]

Originally Posted by creggur

Where the heck would you get a D-ring anyway??

Duh...

At the d-ring store....

[TAH 73]

D-rings any camping/outdoor shop, or if you draw it up on paper and go to a shop that does car tops/boat top repairs they can probably fab up anything you want.